This program provides ground pressure simulation according to each working conditions. And the result of simulation can be printed.
(For large models, please contact to our service dept)

Terms of use

The Crane Ground Pressure simulation may be used to calculate the maximum ground contact pressure for cranes in the working position under static loading. To use the simulator, you must thoroughly read and agree with the following terms of use. If you do not agree with the terms of use, you will not be permitted to use the simulator.

  • 1.
    Purpose

    These terms of use are for use of the Crane Ground Pressure simulation (hereinafter referred to as the "Service") that is hereby offered by Hitachi Sumitomo Heavy Industries Construction Crane Co., Ltd. (hereinafter referred to as the "Company").

  • 2.
    Users

    Only individuals or organizations who agree with these terms of use (hereinafter referred to as "Users")shall be permitted to use the Service.

  • 3.
    Equipment, etc.

    Users shall prepare telecommunications equipment, software and all and any other equipment incidental to those that are necessary to use the Service and shall conclude contracts with telecommunications companies for the provision of the Internet, bearing the liability and the cost.

  • 4.
    Calculation conditions

    To use the Service, Users shall input values of the capacity of the crane and the values listed in the rated lifting load chart that the Company provides separately.

  • 5.
    Changes, suspension, etc., of the Service
    • (1)
      The Company may revise or abolish the whole or any part of the Service or make addition to the Service without prior notice to the Users.
    • (2)
      The Company may suspend or cease the whole or any part of the Service in the case of any of the following events without prior notice.
      • a.
        Operation of the Service becomes difficult because of a fire, a power cut, interruption or cutting off of telecommunications lines, a natural calamity, riot or other force majeure.
      • b.
        Operation of the Service is required to be suspended for the maintenance of the system.
      • c.
        In addition to the above, any case in which the Company logically deems that suspension or cessation of operation is necessary.
    • (3)
      In the case of any revision, cessation, etc., of the Service pursuant to the two sections preceding, the Company shall not be liable whatsoever for any damage caused to Users or third parties.
  • 6.
    Warranty and liability
    • (1)
      The Company shall provide the Service that it is capable of providing at the times that Users use the Service.
    • (2)
      Users should understand that the results obtained by using the Service (hereinafter referred to as the "Calculated Values") are values that are calculated and not values that are actually measured.
    • (3)
      Users shall use the Calculated Values at their own liability and the Company shall not be liable for any damage caused to any of the Users or third parties that is incurred through the use of the Calculated Values by the Users.
  • 7.
    Governing law

    The laws that apply with regard to these terms of use shall be the laws of Japan.

  • 8.
    Competent court

    The Tokyo District Court shall be the exclusive court having jurisdiction of first instance in the case of any lawsuit arising from the use of the Service or these terms of use.

  • Accept & Start simulation

How to use

  1. Select model & specification

  2. Input working condition

  3. Confirm result